The rapid mold change system of injection molding machine has been widely used in the home appliance, electronics, and automobile industries to process parts. Due to the application of the rapid mold change system, the factory can accept some small batches and multi-batch orders. So what are the advantages of the injection molding machine quick mold change system?
1) Easy to install, no need to change the appearance of the injection molding machine, and no need to drill holes on the injection molding machine, just fix the special disk on the threaded hole or T-slot on the back plate of the injection molding machine through bolts and it can be used;
2) The safety factor is high. The quick mold changing system only needs to go through a very short time of charging and demagnetization when changing the mold. No power supply is required during normal use. disappear or decline, both economical and safe;
3) Using the quick mold change system can greatly improve the mold change efficiency and reduce the mold change time. Generally, the mold change and clamping operation of the injection molding machine only takes three minutes, and the mold change of the extra-large mold only takes about ten minutes;
4) The thickness of the special disk is about 5-6cm, which occupies a small space and does not affect the mold opening space of the injection molding machine;
5) Easy to operate, any non-professionals can operate skillfully after only about 1 minute of training.
浙公网安备 33020602000415号
